Membrane Roofing Types

By Tim Carter
©1993-2009 Tim Carter

Summary: There are three basic types of membrane roofing for flat roof repair. These roofing materials enable you to basically shrink wrap your roof! Flat roof membranes take the roof leak worry of yesteryear out of owning a flat roof.

Types of Membrane Roofing Materials

Flat roofs have been around for ages. Old technology dates back thousands of years with respect to deflecting water. Old fashioned tar and pitch (asphalt compounds) were employed almost exclusively until 25 to 30 years ago. In fact, asphalt is still used today although its use is waning.

The new membrane products began to appear about 40 years ago. The explosion in the synthetic rubber industry and the plastics industry helped fuel this growth. The result are flat roofing products that enable you to basically "shrink-wrap" your roof! Prior to the advent of these products, you knew that if you bought a building with a flat roof, dealing with leaks would be inevitable. The new membranes allow you to be unconcerned with each rain cloud that floats over the horizon!

Three Basic Types

There are three major types of flexible roofing membranes. All of them are fairly complex and some have names that you can barely pronounce. I happen to like the products in the first group - those being the Thermoset types.

Thermoset Membranes

These materials are ones that chemically crosslink. What that means to you is that once seams cure you have one giant molecule of roofing over your head and possessions. That is a huge advantage. Many of the synthetic rubber roofs (EPDM) fall into this category. You also find the CSPE, CR, and ECR compounds/membranes in this group. These membranes are fairly thick and often you will find them in thicknesses between 30 and 60 mils. These roofing materials offer superior performance over a wide range of exposures. If applied according to manufacturers recommendations, they will give you leak free performance for many, many years.

Thermoplastic Membranes

These membranes are very similar to the Thermosets but there is no chemical cross-linking or vulcanization. Seams in the materials are welded together with solvents or heat. The welds - when done properly - are as strong as the material.

PVC plastic materials are part of this group as well as the following materials: CPA, CPE, EIP, NBP, PIB, and TPO. These are "code" acronyms you might hear the roofer talk about. Be sure to ask exactly what type of material you are getting so you can see which group it falls into!

Modified Bitumen Membranes

These membranes combine asphalt with modifiers and reinforcement materials. They are often a "sandwiched" roofing material. These materials can perform well in my opinion but they are not as advanced as the other two groups. These materials are often referred to as "torch-down" roofs because a large flame throwing torch melts the asphalt so that seams can be joined together. You might hear your roofer mention the names APP or SBS when referring to this membrane.
Source(s):
http://www.askthebuilder.com/B200_Membrane_Roofing_Types.shtml


Permalink | Report